Track Day Report, October 14, 2023

Well, it was kind of a staggered day with Team Maddox showing up in the AM and doing a bunch of testing laps and one full rotation race. Shaylin Maddox won the only race we did, which I think is her first full race win–Way to go!

Abe Maddox seemed to be a bit distracted but wasn’t too far off. He also won a heat or two.  Shaylin and Abe were both running Viper V-SPEC cars while I was running a bone-stock MegaG+ with a “paper” Whelen Modified body.

Normally, a V-SPEC Viper would blow the doors off a stock MegaG+ 1.7 car. However, with the paper body, the chassis is much faster and handles significantly better. Still working on the paper body design for the 1.7 MG+ but I am getting close to a simple and easy-to-install version. I’m focusing on a USAC Whelen Modified style first and will look at other designs once I sort out what works and what doesn’t.

Place Name Laps Points Total Time
1 Shaylin Maddox 174 83 2428.881
2 Steve Stewart 178 81 2443.839
3 Abe Maddox 158 76 2452.908

Later in the day, Aaron Castro showed up to test some MegaG+ cars and got to meet most of Team Maddox as they were getting ready to roll towards home. Webster Motorsports showed up shortly after Aaron’s arrival.

Team Maddox departing was a bummer but they accomplished their goals and had a great track day. The good news was we still had three drivers on the track so we did a bunch of hot lapping and then clicked off one Viper V-SPEC rotation race. The racing was very close with Aaron bagging second place overall and Kevin Webster very, very close.

We decided to tech the cars to show Aaron the process. Both Kevin’s and Aaron’s cars were relatively close in both dyno numbers and downforce, while Home Cookn’s car was substantially better in both categories.

Turns out, both drivers were running out-of-the box V-SPEC chassis’ with only timing adjustments. Kevin’s car was actually running retarded timing, which is good for small home tracks and tight courses. Aaron’s car was running fairly neutral timing. Both cars had stock Razor front ends and stock PST rear tires.

Of course, advancing the end bell timing makes a big difference in off-the-corner and straightaway speeds, installing smaller profile rear tires increases downforce considerably, and an independent front-end improves corner speed.

All this made me realize that most of our Sportsman drivers are probably running bone-stock Viper V-SPEC cars, which can be very competitive but obviously inferior to a properly setup HOPRA SPEC RACER chassis, which are the only V-SPEC rules we run at Stewart Raceway right now.

Maybe we need to revive the HOPRA SPEC STOCK class. Pretty much the same rules as SPEC RACER but is restricted to hardbodies and no adjustable brush barrels. Independent front-ends are still allowed but that is not a big game changer.

Any other ideas out there? I think the SPEC RACER rules are pretty basic but it looks like we need to bring some parity to the Viper V-SPEC class racing.

Okay, shut up and drive!

Prototype “Paper” SK Modified Body

(Right-click and open in a new tab for larger image)

My first iteration of a “super-light” paper body for our MegaG+ Support Class cars. This one is made out of premium glossy photo paper and is mounted on a 1.7 MegaG+ chassis using 8 mil clear double-sided tape I got from George.

Kevin worked up this body using some sort of drafting paper and then laminated it with some other material.

Both bodies are pretty cool. Haven’t tested them on the track yet but I did run a regular paper prototype last Saturday on a Jag DR-1 chassis and it held up pretty well. These bodies are way light and the car feels and handles like it has no body at all.

Design ideas are limitless and very appealing. We’ll see how durable they are. I’m looking forward to coming up with a Midget car design and upgrading my SWB MegaG+ IROC set. Once you get the design set and printed, it takes about the same time to trim and mount as a typical Lexan body. And way, way cheaper than even a clear Lexan body.

 

A Track Day Racing Fest

Just a few drivers showed up for this one but we sure did a whole lot of racing. Our newest driver, Aaron Castro, braved the Beachcomber traffic and got to the track around 12:40. Webster MotoSports arrived around noon so we got to business by 1:00.

Kevin and I were dinking around with “paper” bodies for various chassis’ when Aaron arrived. Cheap but not without their own issues. Paper bodies have been around for years. The draw is the customization possible and almost zero weight. The plan is to come up with a simple template that anyone could use to make a body. Of course, paper bodies are primarily intended for a body-clip chassis, replacing heavy and expensive plastic or 3D-printed hard bodies.

Once we figure out a workable design we’ll move the material to some thin synthetic material, which will be obviously more durable and easier to secure to the chassis.

On To Racing Action

I won’t bore you all with details but we did seven (7) Dash races, all on the same lane assignment, and all 40 laps. Aaron won the first race running our MegaG+ Support Class cars and he won the last race running Wizzard Storm Extreme cars, courtesy of Webster Motorsports. As you can see, the racing was very close and the cars were all vastly different, from very loose Box Stock TFX cars to Wizzard Storm Extreme magnet cars, we did a lot of racing for a track day.

Place Name Laps Points Total Time
1 Steve Stewart 239 98 2932.967
2 Aaron Castro 236 82 2954.773
3 Kevin Webster 216 66 2950.298

A very fun track day in spite of the heat wave. We stayed on SR3 instead of going indoors and enjoying SR2 in an air-conditioned environment. Had the fans going and the doors wide open.

Thanks for showing up, guys! 

 

Track Day Report

A few hours on the SR3 straight road course and a few races. Team Maddox, Pearson Racing, and Fast Lane Racing showed up to cut some laps and run a few Dash races.

Bottom line: Jerry Pearson dominated the Dash racing with two wins. However, Shaylin Maddox (Abe’s Mom) was so close in second that we needed to review the tapes.

Place Name Laps Points Total Time
1 Jerry Pearson 75 46 1037.239
2 Shaylin Maddox 72 41 1040.78
3 Eric Lane 62 30 1088.66
4 Steve Stewart 56 20 1050.672
5 Abe Maddox 14 11 224.264
6 Grace Maddox 11 7 225.035

Jerry won two of the three but Shaylin won one and was extremely close (1000/sec) in the other two. Both drivers were running Team Fast Lane Vipers. Way close racing!

I’m hoping to get back to some formal racing next weekend. Stay tuned for details on that.

Okay, shut up and drive.

New MegaG+ Editions

I’m sure some of you have seen these cars out there. RaceMasters has released a few new body styles for the MegaG+ 1.7 chassis. I really like those presented here.

I know buying a car for just the body is silly but these bodies are pretty cool. If you’re planning on purchasing additional MG+ platforms, I’d choose one or more of these. They come with a 1.7 chassis but the bodies are impressive also.

You can find these complete cars out there from $30 plus shipping.

 

 

Any interest in running these at some point?

RC Superstore has great prices.