OS3 TFX “Modified”

Description

The OS3 TFX “Modified” class is, of course, based on the OS3 TFX “Lite” platform. While the TFX stock factory platform is amazingly fast. And only slightly slower than a current era Fray T-Jet, the “Modified” version was intended to bridge that slight gap and perhaps allow the TFX to someday compete head-to-head against downforce-restricted ECHORR/Fray platforms.

The primary differences between the TFX “Lite” and the TFX “Modified” class are:

- - Lexan bodies with OS3 body-mounts are allowed.
  - Hot-Stock (balanced & trued) 2-lam Aurora, 3-lam Dash, or OS3 Tornado armatures are allowed. The average of all three armature poles must be greater than 16-ohms.
  - Car width can be extended from stock but must not exceed 1-5/16 (1.3125) inches.
  - Most commercially-available front or rear axle assemblies may be used, including dual-flange rear hubs.

Detailed OS3 TFX “Modified” rules can be found here.

Additional information

Purchase Car Here:	https://www.onestopslotshop.com/tfx-ready-to-run-chassis
Purchase Upgrades Here:	https://www.onestopslotshop.com/tfx-upgrades
Class Rules	https://stewartraceway.org/placeholder-2/os3-tfx-modified-class-rules/