The “Lite” version of the OS3 TFX is essentially a “box stock” TFX platform with only one chassis modification allowed: the stock Gray Dragon motor magnets may be replaced with OS3 Black Dragon motor magnets.
-
- TFX “Lite” Bodies must be hardbodies made of plastic or resin. 3D-printed hard bodies are also allowed.
- Bodies must be fitted with all of the manufacturer’s original or exact-replica bumpers, heads, rollover bars, etc. in their OEM locations.
- Cracked or broken body-mounting posts may be repaired or replaced with the use of glue and/or a plastic or resin sleeve around the original post or a plastic rod/tube in place of the broken post.
- Other than the plastic post reinforcements, stated above, no additional weight may be added to the body.
- The body may be lowered but under no circumstance can the front or rear wheels be higher than the front (hood) or rear deck lids (trunk).
- Lightening of bodies is not allowed, no grinding or removal of material is permitted outside of what is allowed for lowering and side and/or rear glass removal.
- Bodies cannot be heated or reshaped from the original cast of the body and must closely resemble the original OEM design.
- Bodies that have a separate roof and windshield casting/molding, and have molded-in interiors (also known as Hardtops, e.g. Aurora’s ’65 Mustang), may completely remove the interior portion of the body.
- Front and rear wheel wells may be opened up for tire wheel well clearance. This opening may be no larger than a 1/8-inch drill bit (.125″) around the entire wheel well and tire.
- Wheel wells must not be modified in such a way as to allow the use of any other wheelbase than that which was originally intended by the manufacturer of that body.
- Track voltage will be set at 18.1 volts.
NOTE: If anything is not specifically stated or addressed in the above rules it is NOT permitted.
