OS3 TFX “Lite” Class Rules

Lowered and trimmed TFX bodies.

The “Lite” version of the OS3 TFX is essentially a “box stock” TFX platform with only one chassis modification allowed: the stock Gray Dragon motor magnets may be replaced with OS3 Black Dragon motor magnets.

    1. TFX “Lite” Bodies must be hardbodies made of plastic or resin. 3D-printed hard bodies are also allowed.
    2. Bodies must be fitted with all of the manufacturer’s original or exact-replica bumpers, heads, rollover bars, etc. in their OEM locations.
    3. Cracked or broken body-mounting posts may be repaired or replaced with the use of glue and/or a plastic or resin sleeve around the original post or a plastic rod/tube in place of the broken post.
    4. Other than the plastic post reinforcements, stated above, no additional weight may be added to the body.
    5. The body may be lowered but under no circumstance can the front or rear wheels be higher than the front (hood) or rear deck lids (trunk).
    6. Lightening of bodies is not allowed, no grinding or removal of material is permitted outside of what is allowed for lowering and side and/or rear glass removal.
    7. Bodies cannot be heated or reshaped from the original cast of the body and must closely resemble the original OEM design.
    8. Bodies that have a separate roof and windshield casting/molding, and have molded-in interiors (also known as Hardtops, e.g. Aurora’s ’65 Mustang), may completely remove the interior portion of the body.
    9. Front and rear wheel wells may be opened up for tire wheel well clearance. This opening may be no larger than a 1/8-inch drill bit (.125″) around the entire wheel well and tire.
    10. Wheel wells must not be modified in such a way as to allow the use of any other wheelbase than that which was originally intended by the manufacturer of that body.
    11. Track voltage will be set at 18.1 volts.
NOTE: If anything is not specifically stated or addressed in the above rules it is NOT permitted.